Milking machine KhZDO UID-20 M115 Euro

Milking cups are completely metal;

Collector with a plastic base for 240 ml;

Aluminum bucket for 20 liters;

Polycarbonate bucket lid;

Milking system in pairs.

Standard and familiar to us execution of the European apparatus of milking equipment for the hanging part. Milking cups are made entirely of metal, without plastic inserts. Enlarged collector, designed for high-yielding cows. The base of the collector is made of durable and high-quality plastic, in case of a fall or impact, nothing will happen to it. The bucket lid is made of polycarbonate and has a self-clamping gasket with three outlets.

The milking machine UID-20 M115 Euro has a capacity of 22.5 cubic meters / hour. The pump between the two side plates is 115 mm wide, and the pump itself is oil. The engine with a power of 750 W, it is low-speed, traction at 1500 rpm, because of this its torque is greater than that of other models, due to this it scrolls the pump itself more. The wheels in the milking machine UID-20 M115 Euro are made of reliable plastic and solid rubber. This type of wheels perfectly replaces metal analogues, which begin to rust over time.

The UID-20 M115 Euro milking machine reaches 55 dB in noise level, it is not very quiet, the cows need time to get used to it, but the high noise level is justified by the low-speed engine and a large pump.

The machine can work non-stop for 1 hour, if necessary, it can work up to 2-3 hours. After operation, after an hour, it is necessary to look at the temperature regime. This machine can be used all year round, but at temperatures below +5C, the oil in the pump can thicken, for the pump to work correctly, it is necessary to warm it up for half a minute before connecting. It is recommended not to keep the milking machine outside at low temperatures, for a longer operating time.