Milking machine Protek AID-1 Stainless steel

milking cups made of stainless steel;

collector for 140 ml plastic;

bucket lid made of stainless steel;

aluminum bucket for 20 l;

paired milking system.

The price of this machine is higher than that of the aluminum version, this is due to the fact that the lid is made of stainless steel, while the pulsator is separate and the hoses are also connected separately (hoses can be connected without adapters, respectively, the adapters will not break, in case of long-term use this will be economically justified). The AID-1 stainless steel milking machine is perfect for small farms with different cows that can be milked well and poorly. The paired milking system will cope well with any cows. At the same time, the device will be as metal and reliable as possible, nothing will break during intensive use.

The AID-1 stainless steel milking machine has a paired milking system. The principle of operation of the paired milking system is very simple, the pulsators alternately squeeze the two left and two right lobes of the udder, simulating manual milking, due to this the cows are more stable. When there is a paired compression, then during the process two milking cups are slightly raised, while the other two cups are lowered, then the cups change position, thus the system begins to swing and due to this the udder is massaged, and it is due to this process that even the tightest cows begin to give milk. This method of milking is considered the best and most humane.

Oil pump. Such a pump will serve you up to 10 years, which is a lot compared to dry-type pumps.

Built-in wheels in the milking unit. Due to these wheels, moving the milking machine will not be difficult.

Almost silent operation of the device, the noise level does not exceed 40-45 dB. And it is ideal for timid cows.