Plastic post 156 cm for electric shepherd

Country of origin: Germany.

Manufacturer: Kerbl

In a package: 20 pcs.

The post for electric fence is made of ultraviolet-resistant polypropylene

The length of the metal tip (with which the post is easily stuck into the ground) is 200 mm., that is, the above-ground part of the post has a length of 136 mm.

For sufficient stability of the plastic support of the electric fence, it must be stuck into the ground so that the plastic protrusion (pedal) on it is level with the ground surface.

The posts are equipped with special insulators for attaching conductive tape (ribbon) or wire.

A wide range of sizes (designed for all types of animals) and colors. Corner posts intended for mounting the fence must be very strong and made of wood or steel.

The electric fence (electric shepherd) is a lightweight wire fence to which high-voltage pulses are supplied from a special generator. The wire rests on insulators attached to metal, plastic, wooden posts. The fence is designed to protect pens and pastures of domestic farm animals and poultry, crops from damage caused by livestock and animals, and to prevent livestock from getting onto highways and into ravines.

The operating principle of an electric fence is a short-term shock from high voltage electric current when the animal comes into direct contact with the uninsulated wire of the fence.

* Pulse generator (electric fence)

* Tape, String or Wire

* INSULATORS

* LIGHTNING ROD

* WARNING PLATE

* INTERMEDIATE SUPPORTS FOR FENCES