Milking machine KhZDO UID-10 M80 Euro

Metal milking cups;

240 ml collector with plastic base

20 l aluminum bucket;

Polycarbonate bucket lid;

Paired milking system

The UID-10 M80 Euro cow milking machine is designed for farmers who have a large herd and want to produce high-quality and harmless milking. The paired milking system copes with this perfectly. The engine installed in this device has a power of 750 W and 1500 revolutions per minute, which makes the engine low-speed, because of this it has a higher torque.

The milking machine UID-10 M80 Euro has a pump with a capacity of 16.5 cubic meters / hour. The pump is located between two side plates and its width is 80 mm, an oil type pump. The productivity of this device is up to 10 cows per hour. Also in the installation of the milking machine UID-10 M80 Euro there is an enlarged receiver.

Standard configuration of the Euro milking machine model for the hanging part. In this assembly, the milking cups are completely metal, without plastic. The volume of the collector is increased, specially designed for high-yielding cows. The base of the collector is made of plastic, durable and high-quality, which is not afraid of impacts and falls. The bucket lid is made of polycarbonate and comes with a self-clamping gasket, and the hose and pulsator are separate, connected without adapters, thanks to the gasket, which has three outputs.

An important advantage of this device is the ability to connect the hose through an adapter to a special thread in the muffler, this is necessary to divert noise to the street, because not all cows tolerate noise, and with this adapter the noise level is reduced to the noise level of a mixer.

Also in the milking machine UID-10 M80 Euro there are plastic wheels, which are made of high-strength plastic and solid rubber. Such wheels are not afraid of rust and are very reliable and durable.