Milking machine KhZDO UID-10 M80 Koza

Milking cups made of polycarbonate with silicone rubber;

Standard silicone hoses of 2 m;

Aluminum bucket for 20 l;

Aluminum bucket lid;

Synchronous milking system.

The milking machine UID-10 M80 Goat has lightweight milking cups, this is due to the fact that goats and sheep prefer milking without pulling the udder, as it becomes painful and the milking process itself can be disrupted. Also, the milking cups have a special valve, which if the system collapses, it will close and prevent dirt from the floor and various debris from being sucked into the milk can.

The UID-10 M80 milking machine is designed for farmers who have many goats, since this machine copes well with a large number of goats and sheep. The pump in this machine is oil with a capacity of 16.5 cubic meters / hour. The engine in the goat milking machine has a power of 750 W, it is low-speed and traction, 1500 rpm, due to the low speed, the engine has more torque. The vacuum performance in the UID-10 M80 Goat milking machine is 2-3 times higher than that of other machines. The unit in this device has an enlarged receiver.

The milking machine for sheep and goats itself has a noise level of up to 55 dB, but goats do not like loud sounds, and to solve this problem, you can install a brass adapter under the pipe on a special thread on the muffler. By connecting a pipe or hose, you can take it outside and all the exhaust will go outside, without scaring your goats.

Another advantage of the UID-10 M80 goat milking machine is the wheels on the unit, they are made of plastic and solid rubber. Such wheels will never rust, unlike metal wheels, and will serve you for a long time.

Operation of the milking machine UID-10 M80 Koza

It is not recommended to use the device at temperatures below +5C. But if the milking unit was in the cold, it is necessary to warm up the pump before connecting it to the milking buckets so that the oil becomes less viscous and the machine operates correctly.