Milking machine KhZDO UID-10 S80 Installation

Model
FTH-294
Article
uid-10с80ustanovka
Brand
ХЗДО

15 000 грн.

Country of origin
Ukraine
Manufacturer
XZDO
Productivity, hour
up to 20 cows
Voltage, V
220
All the features

Milking machine KhZDO UID-10 S80 Installation

Milking machine KhZDO UID-10 S80 Installation

Vacuum milking unit UID-10 S80 is a part of the milking machine, which is responsible for creating a vacuum. It can be equipped with suspended equipment for large and small cattle. The device is suitable for dairy farms and small farms. In an hour of work with its help it is possible to milk up to 17 cows or 80 goats.

Parts of the milking machine also include a milk can and a spider of the “Maiga” system. They are not included in the delivery set.

Performance

Continuous operation time (min.) - 60

Maximum vacuum level (kPa) - 80

Milking cycle of one cow (min.) - 6-7

Maximum number of cows served in one milking cycle - 2 cows

Nominal vacuum level for milking cows (kPa) - 47-50

Maximum number of cows served during continuous operation of the milking unit - Up to 17 cows

Milking cycle of one goat (min.) - 2-3

Maximum number of goats served in one milking cycle - 4 goats

Nominal vacuum level for milking goats and sheep (kPa) - 37-40

Maximum number of goats served during continuous operation of the milking unit - Up to 80 goats

With the vacuum unit Protek UID-10 S80, milking one cow takes 6-7 minutes, a goat - 2-3 minutes. The productivity of 12.6 m³/hour allows

connecting additional milking lines.

After 60 minutes of operation, a break must be taken. Exceeding the recommended continuous operation time may cause breakdown.

Features of the design of the power unit

The design of the power unit is modular, that is, the engine and pump are connected by a V-belt clutch, and not directly.

The equipment is assembled on a metal frame. It is equipped with wheels and is of a mobile type. The power unit consists of: an engine, a pump and a receiver. A metal vacuum regulator is used to adjust the vacuum. The delivery set includes a vacuum gauge, which is needed to monitor the pressure.

The Protek UID-10 C80 milking installation has a manual valve for draining condensate. A 6 A circuit breaker is used to protect against voltage surges. If necessary, a moisture protection unit can be installed.

Engine

Engine power. The engine is connected to a standard 220 V network.

Shaft rotation speed is 1500 rpm.

The engine belongs to the 3rd category of electrical appliances, that is, it must be used indoors. In summer, a canopy can be installed to protect against precipitation when using the UID-10 S80 milking machine.

Pump

The vacuum pump has a capacity of 12.6 m³/hour. Inside there are graphite blades measuring 40 × 80 × 5 mm.

The pump belongs to the dry type and has a closed design. Dry pumps do not use lubricants, which affects the wear of the plates. It occurs faster, which means that the graphite blades need to be replaced more often.

The pump is a separate module: the rotor has its own shaft, and is not installed on the motor shaft. Bearings are installed in the cover in which the shaft rotates.

Recommendations for use

The UID-10 S80 milking machine can be used in a wide temperature range. Before starting, check the wires and motor for condensation. Drops of water on these units can cause a short circuit. Drain moisture from the receiver after each use.

Characteristics

Country of origin
Ukraine
Manufacturer
XZDO
Productivity, hour
up to 20 cows
Voltage, V
220
Power, W
750
Animals
Cows, sheep, goats

Dimensions and weight

Dimensions (LxWxH)
80×100×60 cm
Weight
50 kg

Reviews: 0

Average score: 0.0

Your Name

Your Review

Rating

Captcha

I have read and agree to the terms and conditions Security Policy

There are no reviews for this product.

Questions: 0

No questions about this product.

Payment & International Delivery (Europe)

Payment

Bank card payment (Visa / Mastercard)
Google Pay
Apple Pay

Important: All international orders are shipped with 100% prepayment only. Cash on delivery and cash payments are not available.

All payments are processed in Ukrainian hryvnia (UAH).

Delivery

International delivery to Europe via Nova Poshta (Nova Poshta Global)
Domestic delivery within Ukraine via Nova Poshta or courier service

Delivery cost is not included in the product price and is calculated individually based on the destination country, parcel weight, and dimensions.

Estimated delivery time to Europe: 5–14 business days.

Product Availability for Europe

Not all products available in Ukraine can be shipped to Europe. Availability may depend on the product type, dimensions, weight, export regulations, or carrier restrictions.

After placing an order, our manager will contact you to confirm international shipping availability, final delivery cost, payment details, and delivery terms.

Customs, VAT & Taxes

Customs clearance fees, import duties, VAT, and other taxes required by the destination country are the responsibility of the buyer and are not included in the product price or delivery cost.

Insurance & Responsibility

All shipments are insured for the full declared value of the goods. If you wish to change the insured value, please inform our manager before shipment.

We are not responsible for loss or damage caused by the transport company during delivery.