Graphite vanes for milking machine vacuum pump (6x43x70 mm)

Reliable graphite vanes for vacuum pumps 6*43*70 mm

Graphite vanes are a critically important component of the vacuum system of a dry-type milking machine. The stability of the vacuum pressure depends on their integrity and geometric accuracy, which directly affects the quality and speed of the milking process. This set of 4 pieces from the manufacturer Barbaros is specially designed to ensure long-term and uninterrupted operation of pumping equipment. The use of high-quality graphite minimizes friction against the walls of the pump chamber, which prevents overheating and premature wear of components.

Why is it important to replace blades on time?

A dry vacuum pump works by sliding blades in the rotor grooves. During operation, the graphite plates gradually wear out, which leads to a decrease in their height. When the blade becomes too short, it ceases to fit snugly against the inner surface of the stator, which causes a drop in the vacuum level. This leads to the milking machine operating unstable, and the milking process takes much longer, which causes stress in the animals and reduces the efficiency of the farm. Regular inspection and timely replacement of the blades is the key to the health of your herd and the durability of the equipment.

Advantages of using original Barbaros spare parts

By choosing graphite blades measuring 6*43*70 mm, you are getting a product that meets strict quality standards. The main advantages include:

• High wear resistance: Specially selected graphite composition ensures long service life even under heavy loads.
• Precise geometry: The dimensions of 6*43*70 mm are maintained with high precision, which guarantees easy installation and no backlash in the rotor grooves.
• Stable vacuum: Replacing worn plates with new ones allows you to instantly restore nominal vacuum performance, ensuring comfortable and safe milking.
• Versatility: The kit is suitable for most popular models of dry-type vacuum pumps used in milking units.
• Cost-effectiveness: Timely maintenance of the pump by replacing the blades avoids expensive overhaul of the entire unit.

Installation and care tips

The procedure for replacing the blades is quite simple and does not require the involvement of service center specialists. Before starting work, it is necessary to clean the pump chamber from graphite dust and lubricant residues, if they have got inside. It is important to make sure that the rotor grooves are clean and have no mechanical damage. After installing the new blades, it is recommended to conduct a short test run of the pump without load so that the graphite rubs against the walls of the chamber. Also, do not forget about the condition of the air filters - clean air entering the pump significantly extends the life of the graphite plates, as it prevents abrasive dust particles from getting inside the working chamber. Following these simple recommendations will allow you to get the most out of the equipment for many seasons.

Characteristics

• Type: graphite vanes for vacuum pump
• Purpose: dry type vacuum pumps for milking machines
• Size: 6 × 43 × 70 mm
• Material: carbon (graphite)
• Quantity in the set: 4 pcs
• Manufacturer: Bartech
• Country of manufacture: Turkey
• Color: gray
• Delivery throughout Ukraine: Kyiv, Lviv, Vinnytsia, Dnipro, Odesa, Kharkiv, Zaporizhia. You can order cash on delivery or self-pickup.

Practical advice on selection and operation

When choosing graphite plates for a vacuum pump, it is important to understand that even minimal deviations in size can negatively affect the operation of the entire system. Although the nominal size of 6×43×70 mm is standard for many Turkish pumps, before placing an order, we strongly recommend that you measure your old blades with a caliper. Remember that a worn blade will always be slightly smaller than a new one, so be guided by the technical passport of your milking machine or the dimensions of the rotor groove.

How to avoid common mistakes when replacing

One of the most common mistakes is trying to install blades into dirty rotor slots. Even a small amount of compacted graphite dust can prevent the free movement of the blade, which will lead to its jamming and subsequent breakage. Before installing a new set, be sure to blow out the slots with compressed air or carefully clean them with a dry cloth. Also, avoid using any grease or oil in dry-type pumps - graphite has self-lubricating properties, and foreign liquids will only accelerate the accumulation of dirt and pump failure.

Criteria for assessing the condition of a vacuum system

In addition to replacing the blades, pay attention to the condition of the inner walls of the stator. If they have deep scratches or a "step"-shaped formation, the new graphite plates will wear out much faster. In this case, it is worth checking the pump for foreign objects or abrasive dust that gets through poor-quality filters. Stable operation of the pump without extraneous noise and vibrations is the best indicator that the blades are selected correctly and installed in compliance with all technical standards.

Security and restrictions

Graphite vanes are a fragile material, so avoid excessive physical effort or impact during installation. When installing, the vane should freely, under its own weight, come out of the rotor groove. If you feel resistance, do not try to "adjust" the size of the vane by grinding, as this will break the tightness of the system and lead to a rapid loss of vacuum. Following these simple rules will help you maintain the productivity of the milking unit at a high level for a long time, ensuring a comfortable milking process for animals and a stable result for your farm.

Frequently asked questions about graphite blades

Does the set include 4 blades?
Yes, the price is for a complete set of 4 pieces, required to service one vacuum pump.

How do I make sure these blades will fit my pump?
The most important criterion is size. Make sure your old vanes are 6x43x70 mm. Also note that they are designed exclusively for dry-type pumps.

What symptoms indicate the need for blade replacement?
The main signs of wear are a drop in vacuum level, the appearance of extraneous noise during pump operation, and an increase in the time required to milk animals.

Can I replace the blades myself?
Yes, the design of most pumps allows you to replace them yourself without using specialized tools. The main thing is to be careful when disassembling the pump chamber.