Milking machine for cows UDA-1-25L

Milking machine for cows UDA-1-25L: section “Milking machines for cows”, manufacturer: Barbaros, country of origin: Türkiye, power supply: 220 V, power: 550 W. Similar models are easy to compare with the catalog filters.

Milking machine for cowsUDA-1-25L

Milking machine for cows, dry type, universal, with a 25 l stainless steel can,  paired milking is designed to milk up to 12 cows per hour

Model parameters

Engine: 0.55 kW, 220 V

Speed per minute: 1450

Vacuum pump power: 180-200 l / min

Size of blades: 70x43x4.9

4 blades

Stainless steel cups.

BUCKET stainless steel 25 l.

Collector 240 ml.

Pulsator: paired Increased teat rubber for quick milking of cows!

WARRANTY: 12 month.

In addition available are all consumables and spare parts for re-equipment.

The unit is designed for milking cows in the following conditions

-    operation indoors;

-    the unit can only milk animals with normally developed quarters of the udder.

-    network voltage - 220V

-    ambient temperature - not less than +5°С

Before putting the product into operation, carefully read this manual. 

About the product

The milking machine is dependable, economical and simple to operate. This unit is widely used for machine milking of cows in private households and small livestock farms. To achieve standards in the field of hygiene and milk quality, getting the most out of the cow and preventing mastitis and other diseases, the user must have certain knowledge of the mechanism of the milking machine, understand how to use it correctly, for which it is necessary to CAREFULLY READ THE INSTRUCTIONS! 

A vacuum unit assembled with a receiver is installed on the chassis (support frame), which uses a vane-rotor vacuum pump with graphite blades that does not require lubrication. The switch is located on the cover of the electric motor. When the electric motor is turned on, a vacuum is created in the receiver for several seconds. The vacuum value can be adjusted using the regulator located on the receiver.

The vacuum from the receiver is divided into two lines. The first one leads to the bucket

and then through the milk hose supplies a constant vacuum to the milk collector. According to this system, under the action of the vacuum, milk is sucked out of the animal's udder and gets into the can. The second vacuum line leads to the pulsator. The paired milking pulsator is a device that makes it possible you to get an interruption of the vacuum action in the proportion of 60% suction stroke, 40% rest, while the suction and rest strokes in 2 milking cups out of 4 are in antiphase. This creates the effect of alternately sucking different parts of the animal's udder, which is as close as possible to the natural process of milking. 

Model parameters

Performance - 10-12 cows per hour

Nominal voltage - 220V

Power consumption - 550 W

Vacuum pump performance - 250 l/min

Vacuum pump type - dry

Dimensions of graphite pump blades - 6*43*70

Working vacuum metric pressure - 40-50 kPa

Milk collector capacity - 200 l/min

Pulsation frequency - adjustable

Pulsation ratio - 60:40 in pairs

Can volume - 25 l

Dimensions - 82*86*80 cm

Weight - 50 kg

What is in the box

Mobile vacuum unit - 1

Milking bucket with lid - 1

Assembled milking equipment with manifold and hoses - 1

Removable handle - 1

Removable milking equipment holder - 1

Cleaning brushes for the unit - 2

Pulsator - 1

Vacuum gauge - 1

Operating manual - 1

Packaging container - 1

Order Milking machine for cows UDA-1-25L at FermaTeh: we advise on livestock equipment and deliver across Ukraine.